Produse pentru căldură pvc (33)

Nuancier HELIOS pour tous nos produits en PVC : - fenêtres; - portes d’entrée ; - portes coulissantes

Vi produserer hyllelister og hyllelister til ulike butikker og supermarkeder. Materialet vi lager er PVC, PP, Pet Kald og varm bøyning mulig

It has similar application areas with PVC. It has chemical resistance to acids and bases. It features weldability. Weldability is more difficult than PVC but more resistant weld seams are obtained. It has higher temperature resistance than polyethylene and PVC. Cost is low and economical since its density is very low. It has a high impact resistance. It can be used on section plates. Mechanical strength values are better compared to Polyethylene.

SOLVENT PAINT of COSMOCHROME is a high quality undercoat for concrete surfaces (concrete columns, concrete floors, walls, ceramic tile roofs etc). It is highly durable against extreme weather conditions and atmosphere pollution. It has strong adhesion, great covering power and extreme hardness PACKAGE:0,75 LT, 10 LT, 2,5 LT COLOR:Black, Cypress Green

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

It is a chelated liquid potash that facilitates the availability of potassium. Being completely soluble, its application is very fast and is immediately assimilated by the plant. Improves the organoleptic quality of fruits, vegetables and industrial crops, as well as the coloration of the flowers of ornamental plants. Applied at the end of the vegetative phase (before harvesting or harvesting) it advances ripening, increases resistance to drought and climatic adversities. The presence of an adequate dose of chelating agent guarantees the total availability of potassium, regardless of the quality of the water used for foliar and fertigation treatments SKU:n/a Size:1000 LITERS, 20 LITERS, 5 LITERS

Protects the outdoor insulation from U.V. and inclement weather. White paint:0.75 litre

New generation solvent cement for rigid PVC pipes in pressure systems. Suitable for use in drinking water systems. THF-free. 2 year shelf life. Thixotropic.

Ihr eigener Polypropylen Pool ermöglicht Ihnen kostbare Momente der Entspannung. Baden im azurblauen Wasser des Pools zu jeder Zeit, ob tagsüber oder am Abend ist dessen Garantie. Dies beweist die Zufriedenheit unserer Kunden aus dem In- und Ausland. Die Pools werden aus Polypropylen (Compact Pools 8 mm und Milano Pools 8 mm) geschweißt, der UV stabilisiert ist. Das Material bieten wir in vier Farben an. Die Pools sind mit zuverlässiger Technologie ausgestattet, die für die Reinigung und Wasserpflege sorgt. Je nach Kundenwunsch kann man den Pool mit weiterem Zubehör bestücken.

ADLER PUR-based coatings are modern solvent-based systems that meet the most demanding standards in furniture and interior decoration. The best resistance, both for chemical and mechanical stresses and strains, as well as ease of application and use are the special features of this type of coating system. ADLER offers the best choice of PUR-based coatings for the most diverse types of wood as well as the most varied design concepts. Premium quality and efficient use are always ensured in the process. In this manner, you can meet almost any need or requirement for the surface as desired by your customers.

Biobasierte, nitrit- und aminfreie korrosionshemmende Verpackungsfolie Die nächste Generation umweltfreundlicher, nitritfreier VCI Folien. Innovative Korrosionsschutzfolie überzeugt durch die Kombination aus maximalen Rostschutz aus umweltreundlichen Bestandteilen, überragenden mechanischen Eigenschaften und schonender Anwendung.

Poliuretano (5,0 kg) + endurecedor (0,7 kg) es decir, un kit de 5,7 kg Aplicaciones: Para todos los revestimientos de suelos interiores o exteriores de caucho, en losetas o en rollo, las moquetas y los céspedes sintéticos. Ventajas: Apto para el encolado de numerosos revestimientos y sobre soportes tales como hormigón y aglomerados. Recomendado para los usos intensivos. Gracias a su flexibilidad, puede ser sometido a importantes variaciones de temperatura

Belongs to the most popular thermoplastics with constructional application. It owes its popularity to special properties, such as high mechanical strength, excellent sliding properties, high impact resistance, good chemical resistance, damping ability and machinability (turning, milling, cutting)

"Para aplicações eletrônicas e espaciais que exigem baixa liberação de gases e condensáveis ​​voláteis mínimos para evitar condensação em dispositivos sensíveis. Para colagem ou vedação de elastômeros de silicone e alguns metais ou plásticos"

Die mehr als 40-jährige Erfahrung in der Polyurethanverarbeitung mit den PUR Werkstoffsystemen sowie Formulierungen für Spezialanwendungen garantieren hochwertige Formteile nach Kundenwunsch.

Schraubensicherungslack (Plombierungsicherung) in unterschiedlichen Farben und Lösungsmittelhaltig für ein sicheres Sichern und Siegeln von Schrauben. Erhältlich in und 15 ccm und 60 ccm Tuben. Deutschland: 21,50 €

Soluciones de revestimiento de madera personalizada y de calidad. Novalk es un fabricante y distribuidor mayorista de revestimiento para madera. Ofrecemos una amplia gama de productos para diversas aplicaciones. Nuestros revestimientos para madera garantizan la protección, el acabado y la durabilidad de sus proyectos, ya sea para uso en interiores o exteriores.

Properties: ALDOVET SAN is a special surface disinfectant concentrate on an excellent bactericidal, fungicidal, and virucidal effect. ALDOVET SAN is very well suited for the disinfection of surfaces and equipment in livestock barns, as well as for working surfaces, sanitary facilities, and animal transport vehicles. Application: Only apply on acid-resistant surfaces. Before disinfection, all surfaces must be cleaned thoroughly with suitable cleaning agents for animal houses (e.g. ALDOVET TENS). After the surfaces are cleaned and dried the proper use-solution of ALDOVET SAN is applied with the usual application equipment. Surfaces with animal contact must properly be rinsed with water after disinfection.

RUNDKOPFSCHRAUBEN

Adesivo e rasante premiscelato alleggerito con sfere di vetro a base di leganti idraulici ad elevato livello qualitativo costante, prodotto con impianto computerizzato. L’incollaggio e la rasatura dei pannelli isolanti di polistirolo, polistirene (anche goffrato), poliuretano, sughero, legno cemento in interno ed esterno ; la rasatura di superfici in calcestruzzo, rivestimenti rustici, plastici e/o minerali, intonaci tradizionali o premiscelati a base di calce e cemento sia nuovi che vecchi anche se verniciati purché in ottimo stato di conservazione, di intonaci che presentano lesioni da ritiro, sarà realizzata con adesivo/rasante in polvere alleggerito con sfere di vetro, a base di leganti idraulici tipo “INTOCOL PP LIGHT” della MALVIN S.r.l., applicato a mano e da impastare con sola aggiunta d’acqua, con un consumo di 2/4,5 kg/mq come collante e di 2,5/3 kg/mq come rasante, con resistenza a compressione a 28 gg di categoria CS III .

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul

PROPERTIES Decorative and protection purpose, can be applied on plaster, concrete and any surface. Excellent adhesion ability works any surfaces. It does not crack, blister or spill. It is odorless, human and environment friendly. First class decorative paint which has a great coverage capability and applied easily.

Acrylic copolymer is an emulsion-based, silicone-folded, textured, thick-grained exterior wall coating material. It adheres very well to surfaces, does not crack and flake, and does not fade. It ensures that the moisture on the wall is expelled with its ability to breathe with its waterproof properties.

Common type wires and terminals to simplify earthing scheme organization. Applicable product:Rec15_AI1_5p, Rec25_AI1_5p

Произвеждаме рафтови ленти и рафтови ленти за различни магазини и супермаркети. Материалът, който изработваме е PVC, PP, Pet Възможно студено и горещо огъване

Rapid high strength, ready to use wood adhesive which dries transparent. PACKAGE:200 GR, 500GR

Protech Sil P Water-repellent, breathable, pigmented paint based on siloxane resins in water dispersion for painting and renovating civil and industrial buildings, and newly manufactured, for both external and internal facades. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana). Protech Sil P creates a microporous filter that effectively prevents the penetration of water and aggressive solutions without compromising the necessary breathability of masonry. Waterproofing and breathable, protective and decorative finishing, for façades in vintage buildings and monuments, subject to protection by the "cultural heritage" or otherwise. Painting of dehumidifying reinforcement cycles with macroporous plasters. Suitable for media like old and new mineral plasters and for pre-existing emulsion paints, provided they are adherent to the media. The application supports should be adequately prepared: free from fouling, powder, crumbling and non-adhering parts, etc., previously treated with the specific fixative Protech Sil Fix. The product can be applied by brush, roller or spray, in two coats. The maximum dilution with water will be 10-15% of the weight of the product. Apply from 0.25 to 0.35 liters of Protech Sil P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish. Information: Emulsion paint based on P.V.A-VEOVA copolymer. Applycating with brush, roller or airless and thinning with 5-10% clean water. The spreading rates are 9-12m²/Lt. on previously prepared surfaces. It drying normally on touch after 1-2 hours and recoatable after 3 hours. Times make different under cold or dump conditions PACKAGE:0,17 LT, 0,375 LT, 0,75 LT, 10 LT, 3 LT COLOR:Black, Blue

Solvent cement for rigid PVC pipes in pressure systems. CE marked. 2 year shelf life. Thixotropic.